Timex
Timex Q Timex Reissue 38 Strap Size — 18mm Lug Width
The Timex Q Timex Reissue 38 has a 18mm lug width, so it takes a 18mm watch strap.
Lug width18mm
| Lug width | 18 mm |
|---|---|
| Case size | 38 mm |
| Lug-to-lug | 45 mm |
| Thickness | — |
| Spring bar Ø (typical) | Not confirmed |
| End type | Straight |
Strap styles that fit
- NATO / Zulu18mm fits if the strap's thickness clears the case under the bars.
- PerlonWoven pass-through, 18mm.
- 2-piece leatherStraight ends fit flush.
- Rubber / siliconeDivers & sports fit well.
- Milanese / meshStraight-end 18mm mesh fits.
- Metal braceletNeeds 18mm end-links shaped for this case.
Fit & sizing notes for the Q Timex Reissue 38
- Width: buy 18mm straps. Tapered straps listed as 18/16mm or 18/14mm fit too; only the first number has to match. See strap sizes explained.
- Spring bars: 18mm long. We haven't confirmed the diameter for this model, so measure the old bar before buying replacements (spring bar sizes).
- Wrist fit: at 45mm lug-to-lug it should sit within the top of wrists from about 15.0cm up (rule of thumb: lug-to-lug under ~30% of wrist size). That's longer than 16% of the watches in our index. See what size watch suits your wrist.
Sources & corrections
Lug width checked against: Timex: Q Timex Reissue 38mm (TW2U62000); Two Broke Watch Snobs: Q Timex review. Last checked 24 October 2026.
Spec wrong for your watch? Send us a correction with your reference number.
Get the right strap
Links open Amazon — we may earn a commission at no cost to you.
Timex Q Timex Reissue 38 — strap questions
What size strap does the Q Timex Reissue 38 take?
The Timex Q Timex Reissue 38 has a 18mm lug width, so you need a 18mm watch strap.
Will any 18mm strap fit the Q Timex Reissue 38?
Most will. Width is the main thing to match, but also check that the strap's spring-bar holes suit the bars, and that the strap is thin enough to clear the case between the lugs. A metal bracelet needs 18mm end-links made for this model.
What spring bar size does the Q Timex Reissue 38 use?
18mm long. We haven't confirmed the diameter for the Q Timex Reissue 38, so measure the original bar with calipers before buying replacements.
Is the Q Timex Reissue 38 good for strap swapping?
Yes. With standard 18mm spring-bar lugs, NATO, leather, rubber and mesh straps can all be fitted with a spring-bar tool.